EDH-2SKHEDH-2SKH (long and short) are intended to replace loose endplates of the VBG SKUR and VBG SKU types already fitted on vehicles, in order to fit the VBG DB35V and VBG DB75V drawbeams. |
With these endplates the drawbeam is always "completely underslung".
It is assumed in other words that there are always holes drilled in the truck frame (2 x 4 = 8 pcs, diameter 17 mm per side) where the existing endplates are fitted.
If the space over the existing endplate is greater than or equal to 70 mm, EDH-2SKH should be fitted instead, which in turn requires four extra holes in the frame side. These are drilled by using the endplate as a template.
EDH-2SKH (long, with a side = 419 mm) lowers the connection point by 39 mm in comparison with SKU/SKUR. EDH-2SKH (short, with a side = 380 mm) produces the same height. Both types of endplates move the connection point backwards by 36 mm.
Must not be inverted! Supplied in pairs.
|
Bolt kits for fitting the drawbeams can be found on the page for respective drawbeams.