Underrun protection

VBG Sliding underrun protection URSP 180 - Hydraulic operated

With VBG’s pre-assembled, sliding underrun protection , you can get the protective beam in the required position, by choosing one of the four different arm lengths. The robust system is equipped with play-free joints and is easy to fit. For maximum comfort and safety, choose between manual or hydraulic operation. The system is tested and approved as underrun protection in the inner and outer positions in accordance with UNECE R58 revision 3. If you choose sliding underrun protection with parallel brackets, more stable operation is achieved. Underrun protection with parallel brackets is available for most European countries apart from France, Italy, the Netherlands and Germany. All constituent parts have a surface treatment of the highest quality, with a powder-coated finish for increased durability. VBG’s underrun protection system can be mounted on many types of chassis with different frame rigidity (see table under Technical Data)

VBG Sliding underrun protection URSP 180 - manually operated

With VBG’s pre-assembled, sliding underrun protection , you can get the protective beam in the required position, by choosing one of the four different arm lengths. The robust system is equipped with play-free joints and is easy to fit. For maximum comfort and safety, choose between manual or hydraulic operation. The system is tested and approved as underrun protection in the inner and outer positions in accordance with UNECE R58 revision 3. If you choose sliding underrun protection with parallel brackets, more stable operation is achieved. Underrun protection with parallel brackets is available for most European countries apart from France, Italy, the Netherlands and Germany. All constituent parts have a surface treatment of the highest quality, with a powder-coated finish for increased durability. VBG’s underrun protection system can be mounted on many types of chassis with different frame rigidity (see table under Technical Data)

Sliding underrun protection URSP 180-2 - manually operated

With VBG’s pre-assembled, sliding underrun protection , you can get the protective beam in the required position, by choosing one of the four different arm lengths. The robust system is equipped with play-free joints and is easy to fit. For maximum comfort and safety, choose between manual or hydraulic operation. The system is tested and approved as underrun protection in the inner and outer positions in accordance with UNECE R58 revision 3. If you choose sliding underrun protection with parallel brackets, more stable operation is achieved. All constituent parts have a surface treatment of the highest quality, with a powder-coated finish for increased durability. VBG’s underrun protection system can be mounted on many types of chassis with different frame rigidity (see table under Technical Data)

Sliding underrun protection URSP 180-2 - Hydraulic operated

With VBG’s pre-assembled, sliding underrun protection , you can get the protective beam in the required position, by choosing one of the four different arm lengths. The robust system is equipped with play-free joints and is easy to fit. For maximum comfort and safety, choose between manual or hydraulic operation. The system is tested and approved as underrun protection in the inner and outer positions in accordance with UNECE R58 revision 3. If you choose sliding underrun protection with parallel brackets, more stable operation is achieved. Underrun protection with parallel brackets is available for most European countries apart from France, Italy, the Netherlands and Germany. All constituent parts have a surface treatment of the highest quality, with a powder-coated finish for increased durability. VBG’s underrun protection system can be mounted on many types of chassis with different frame rigidity (see table under Technical Data)

VBG Sliding underrun protection URSP

With VBG’s URSP (Underrun Retractable Steel Protection), you can easily adjust the protective to the preferred driving position. Choose hydraulic operation for maximum comfort and safety. All component parts are surface treated with wet coating.

VBG Foldable Underrun Protection EUF 180 - protection beam in aluminium

VBG foldable underrun protection system. A system with an aluminium protective beam that makes it easy and convenient to raise and lower the protective beam when necessary. For example, to be able to reach a low and far underslung coupling with large-volume cargo trailers. The user-friendly design means you avoid difficult and dangerous work procedures when operating the system. The protective beam can be installed together with any of VBG’s drawbeams. VBG’s underrun protection system can be mounted on many types of chassis with different frame rigidity (see table under Technical Data)

VBG Foldable Underrun Protection EUF 180 - round protective beam

VBG foldable underrun protection system. A system with a steel, cylindrical profile protective beam that makes it easy and convenient to raise and lower the protective beam when necessary. For example, to be able to reach a low and far underslung coupling with large-volume cargo trailers. The user-friendly design means you avoid difficult and dangerous work procedures when operating the system. The protective beam can be installed together with any of VBG’s drawbeams. VBG’s underrun protection system can be mounted on many types of chassis with different frame rigidity (see table under Technical Data)

VBG Foldable Underrun Protection EUF 180 - protective beam with open profile

VBG foldable underrun protection system. A system with a steel, open profile protective beam that makes it easy and convenient to raise and lower the protective beam up and down when necessary. For example, to be able to reach a low and far underslung coupling with large-volume cargo trailers. The user-friendly design means you avoid difficult and dangerous work procedures when operating the system. VBG’s underrun protection system can be mounted on many types of chassis with different frame rigidity (see table under Technical Data)

VBG Hinged underrun protection EUFA

EUFA (Endplate Underrun Protection Foldable and Adjustable) is a flexible and ergonomically designed underrun protection that can be folded away and adjusted lengthwise. Ideal for those who want a simple and convenient solution for e.g. bulk centre-axle trailers. The underrun protection is supplied fully-loaded, all you need to do is specify the vehicle manufacturer/model.

VBG Backward extension UPSO-2

Alternative brackets for protective beams that enable a rearward position for the underrun protection. The UPSO-2 endplate kit can be installed directly to the truck frame and to all endplates for underslung DB drawbeams. The UPSO endplate kit allows lengthwise movement of up to 450 mm. UPSO-2 can be installed directly to the truck frame and to the following endplates: EDS, EDH-2, EDM, EDL, EDK, EDHZ, EDMS-2, EDC-1, EDH-2SKV, EDH-2SKH, EDK SC, EDH-3, EDM-2 and EDL-2. Supplied in pairs. Suitable for protective beams UHAP-3, UOSP and UCSP.

VBG Aluminium beam UHAP 180

Weight-optimised aluminium protective beam. The protective beam is available in two lengths for a variety of vehicle and frame widths. The protective beam is compatible with both fixed and hinged mounting so you can easily select a customisation according to your needs. VBG’s underrun protection system can be mounted on many types of chassis with different frame rigidity (see table under Technical Data)

VBG Aluminium beam UHAP 100

The protective beam is suitable for vehicles with a total weight of up to 12 tonnes. Weight-optimised aluminium protective beam.

VBG Steel beam UCSP 180 - For fixed mounting

Round steel protective beam. The product has a surface treatment of the highest quality, with a powder-coated finish for increased durability. The beam is equipped with covers on the sides and integrated reflectors. An outline marking runs the full length of the beam for increased visibility and safety in traffic. VBG’s underrun protection system can be mounted on many types of chassis with different frame rigidity (see table under Technical Data)

VBG Steel beam UCSP 180 - For Trailer mounting

Round steel protective beam. The product has a surface treatment of the highest quality, with a powder-coated finish for increased durability. The beam is equipped with covers on the sides and integrated reflectors. An outline marking runs the full length of the beam for increased visibility and safety in traffic. VBG’s underrun protection system can be mounted on many types of chassis with different frame rigidity (see table under Technical Data)

VBG Steel beam UCSP 180 - TOW

Round protective beam in steel for permanent installation. Approved for ball bracket mounting. The product has a surface treatment of the highest quality, with a powder-coated finish for increased durability. The beam is equipped with covers on the sides. An outline marking runs the full length of the beam for increased visibility and safety in traffic. The protective beam is available in two versions for ball bracket mounting: ISO 83x56 and UK 85x45. VBG’s underrun protection system can be mounted on many types of chassis with different frame rigidity (see table under Technical Data)

VBG Aluminium beam UHAP-3

Lightweight protective beam in aluminum with a new design. Approved in accordance with UNECE R58 Revision 2. The protective beam is available in two lengths for a variety of vehicle and frame widths. The protective beam is compatible with both fixed and hinged mounting.

VBG Aluminium beam UHAP-2

Lightweight protective beam in anodised aluminium, ready to be equipped with mud flap attachments, and also available in different version with mounted reflectors for tractor units. The beams are available in different lengths for a variety of vehicle and frame widths.

VBG Steel beam UCSP

Flexible and lightweight steel protective beam. Cylindrical profile.

VBG Steel beam UDSP

Strong steel protective beam. Rhomboid profile, ideal for construction vehicles.

VBG End plate - Hinged underrun protection - EUF-2 Left

Endplate kit that makes it easy and convenient to fold the protective beam up and down when necessary, for example, to be able to reach a low, inset underslung coupling. The user-friendly design means that you avoid difficult and dangerous work procedures. The endplates can be included as part of a flexible system adapted for driving with large bulk centre-axle trailers. The protection is mounted with one of VBG's drawbeams. By using parallel brackets this creates more space for a centrally installed coupling when the protective beam is lifted up.

VBG End plate - Hinged underrun protection - EUF-2 Right

Endplate kit that makes it easy and convenient to fold the protective beam up and down when necessary, for example, to be able to reach a low, inset underslung coupling. The user-friendly design means that you avoid difficult and dangerous work procedures. The endplates can be included as part of a flexible system adapted for driving with large bulk centre-axle trailers. The protection is mounted with one of VBG's drawbeams. By using parallel brackets this creates more space for a centrally installed coupling when the protective beam is lifted up.

Solutions

Support

Calculator

Blog