URSP

Sliding Systems

VBG Sliding underrun protection URSP

VBG Sliding underrun protection URSP

With VBG’s URSP (Underrun Retractable Steel Protection), you can easily adjust the protective to the preferred driving position. Choose hydraulic operation for maximum comfort and safety. All componen...

End plate kit

Using different endplate kits, you can achieve alternative installations of the sliding underrun protection. The hole patterns on the endplates are adapted to the VBG drawbar programme and have a first-rate surface-treatment with a high finish and excellent corrosion resistance. Sliding underrun protection can be mounted on the following endplates:

VBG End plate - Drawbeam High mounting - EDU-2

VBG End plate - Drawbeam High mounting - EDU-2

The endplate kit is intended for installation of drawbeams that are completely underslung, and for installation of underrun protection. Fits all drawbeams in VBG’s DB range. Supplied in pairs.
VBG End plate Underrun Protection Short mounting - EUS-4

VBG End plate Underrun Protection Short mounting - EUS-4

For mounting the underride protection in direct connection to the drawbeam
VBG End plate Underrun Protection High mounting - EUH-2

VBG End plate Underrun Protection High mounting - EUH-2

For mounting on low frames.

VBG End plate Underrun Protection High mounting - EUH-3

VBG End plate Underrun Protection High mounting - EUH-3

For mounting on low frames. Undrilled endplate.

VBG End plate Underrun Protection Medium high mounting - EUM-2

VBG End plate Underrun Protection Medium high mounting - EUM-2

For mounting on high frames.
VBG End plate Underrun Protection Medium high mounting - EUM-3.

VBG End plate Underrun Protection Medium high mounting - EUM-3.

For mounting on high frames. Undrilled endplate.
VBG End plate Underrun Protection Low mounting - EUL

VBG End plate Underrun Protection Low mounting - EUL

For rearward positioning of the underrun protection
R58.03
VBG End plate - Drawbeam High mounting - EDH-3

VBG End plate - Drawbeam High mounting - EDH-3

The EDH-3 endplate kit is intended for fully-underslung, high installation of drawbeam DB75V-2.
VBG End plate - Drawbeam Medium high mounting - EDM-2

VBG End plate - Drawbeam Medium high mounting - EDM-2

The EDM-2 endplate kit is intended for fully-underslung drawbeam installation.
VBG End plate - Drawbeam Low mounting - EDL-2

VBG End plate - Drawbeam Low mounting - EDL-2

The EDL-2 endplate kit is intended for fully-underslung, low drawbeam installation.

VBG End plate - Drawbeam - EDF 250

VBG End plate - Drawbeam - EDF 250

The EDF-250 endplate kit is intended for fully underslung installation of drawbeam DB 75V-2. The G=154/167 variant is intended for trucks with tail lift and to be fitted with Driver Assist, but can a...
R58.03
VBG End plate - Drawbeam High mounting - EDH-2

VBG End plate - Drawbeam High mounting - EDH-2

The EDH-2 endplate kit is intended for fully-underslung, high installation of drawbeam DB75V-2. Supplied in pairs.
VBG End plate Underrun Protection Trailer mounting - EUT

VBG End plate Underrun Protection Trailer mounting - EUT

For mounting on trailers with I-beam
R58.03
VBG End plate - Drawbeam - EDF 150

VBG End plate - Drawbeam - EDF 150

The EDF-150 endplate kit is intended for fully-underslung drawbeam installation. Intended for holes bored within the reference dimensions.
VBG End plate - Drawbeam - EDF 250

VBG End plate - Drawbeam - EDF 250

The EDF 250 endplate kit is intended for fully underslung drawbeam installation. Intended for holes bored within the reference dimensions. EDF 250 is available in 2 different length.
R58.03
VBG End plate - Drawbeam High mounting - EDH-4

VBG End plate - Drawbeam High mounting - EDH-4

The EDH-4 endplate kit is intended for fully-underslung, high installation of drawbeam DB75V-3.
R58.03
VBG End plate - Drawbeam Medium high mounting - EDMS-2

VBG End plate - Drawbeam Medium high mounting - EDMS-2

The endplate kit is primarily intended for trucks with anti roll bar and fully underslung installation. Supplied in pairs. The endplate cannot be inverted!
VBG End plate - Drawbeam Medium high mounting - EDHZ

VBG End plate - Drawbeam Medium high mounting - EDHZ

The endplate kit is intended for fully underslung drawbeam installation. The endplate moves the coupling forwards 330 mm. Intended for vehicles with short overhang. Supplied in pairs.

Accessories

VBG Screw kit

VBG Screw kit

Always use the right type of screw with the correct screw length. This is a matter of safety, since an incorrect screw length can affect the strength of the system! Also choose high-quality screws for...