Fixed mounting

Consists of endplates that can easily be bolted to the vehicle chassis. To these, the protective beam is mounted with a customised bracket. With an extended attachment/arm, you can move the position of the protective beam backwards. You can also select removable underrun protection, which can be lifted off if necessary.

End plate-DB75V-2

R58.03
VBG End plate - Drawbeam/underrun protection - EDHU 180

VBG End plate - Drawbeam/underrun protection - EDHU 180

The EDHU endplate kit is intended for underslung drawbeam installation and underrun protection. Approved in accordance with UNECE R58 Revision 3.
VBG End plate - Drawbeam High mounting - EDU-2

VBG End plate - Drawbeam High mounting - EDU-2

The endplate kit is intended for installation of drawbeams that are completely underslung, and for installation of underrun protection. Fits all drawbeams in VBG’s DB range. Supplied in pairs.
R58.03
VBG End plate Underrun Protection Flat mounting - EUP 180

VBG End plate Underrun Protection Flat mounting - EUP 180

For mounting the underride protection in direct connection to the drawbeam DB75V-2/DB75V-3. Approved in accordance with UNECE R58 Revision 3.

VBG End plate Underrun Protection Flat mounting - EUP

VBG End plate Underrun Protection Flat mounting - EUP

For mounting the underride protection in direct connection to the drawbeam
VBG End plate Underrun Protection Short mounting - EUS-4

VBG End plate Underrun Protection Short mounting - EUS-4

For mounting the underride protection in direct connection to the drawbeam

End plate - assembly with VBG DB75V-3 drawbeam (underslung assembly)

R58.03
VBG End plate Underrun Protection Flat mounting - EUP 180

VBG End plate Underrun Protection Flat mounting - EUP 180

For mounting the underride protection in direct connection to the drawbeam DB75V-2/DB75V-3. Approved in accordance with UNECE R58 Revision 3.

VBG End plate Underrun Protection Flat mounting - EUP

VBG End plate Underrun Protection Flat mounting - EUP

For mounting the underride protection in direct connection to the drawbeam
VBG End plate Underrun Protection Short mounting - EUS-4

VBG End plate Underrun Protection Short mounting - EUS-4

For mounting the underride protection in direct connection to the drawbeam

End plate - assembly with VBG C7 drawbeam (semi underslung assembly)

R58.03
VBG End plate - Drawbeam/underrun protection - EDSU 180

VBG End plate - Drawbeam/underrun protection - EDSU 180

The EDSU endplate kit is intended for semi-underslung drawbeam installation and underrun protection. Approved in accordance with UNECE R58 Revision 3.

End plate - assembly with VBG C7 drawbeam (central assembly)

R58.03
VBG End plate Underrun Protection High mounting - EUH 180

VBG End plate Underrun Protection High mounting - EUH 180

For mounting on low frames. The product has a surface treatment of the highest quality, with a powder-coated finish for increased durability. Approved in accordance with UNECE R58 Revision 3.
R58.03
VBG End plate Underrun Protection High mounting - EUHC 180

VBG End plate Underrun Protection High mounting - EUHC 180

For mounting on low frames. The product has a surface treatment of the highest quality, with a powder-coated finish for increased durability. Approved in accordance with UNECE R58 Revision 3. Undril...
R58.03
VBG End plate Underrun Protection Medium high mounting - EUM 180

VBG End plate Underrun Protection Medium high mounting - EUM 180

For mounting on high frames. The product has a surface treatment of the highest quality, with a powder-coated finish for increased durability. Approved in accordance with UNECE R58 Revision 3.
R58.03
VBG End plate Underrun Protection Medium high mounting - EUMC 180

VBG End plate Underrun Protection Medium high mounting - EUMC 180

For mounting on high frames. The product has a surface treatment of the highest quality, with a powder-coated finish for increased durability. Approved in accordance with UNECE R58 Revision 3. Undri...
VBG End plate Underrun Protection High mounting - EUH-2

VBG End plate Underrun Protection High mounting - EUH-2

For mounting on low frames.

VBG End plate Underrun Protection High mounting - EUH-3

VBG End plate Underrun Protection High mounting - EUH-3

For mounting on low frames. Undrilled endplate.

VBG End plate Underrun Protection Medium high mounting - EUM-2

VBG End plate Underrun Protection Medium high mounting - EUM-2

For mounting on high frames.
VBG End plate Underrun Protection Medium high mounting - EUM-3.

VBG End plate Underrun Protection Medium high mounting - EUM-3.

For mounting on high frames. Undrilled endplate.
VBG End plate Underrun Protection Low mounting - EUL

VBG End plate Underrun Protection Low mounting - EUL

For rearward positioning of the underrun protection

End plate - assembly without drawbeam

R58.03
VBG End plate Underrun Protection High mounting - EUH 180

VBG End plate Underrun Protection High mounting - EUH 180

For mounting on low frames. The product has a surface treatment of the highest quality, with a powder-coated finish for increased durability. Approved in accordance with UNECE R58 Revision 3.
R58.03
VBG End plate Underrun Protection High mounting - EUHC 180

VBG End plate Underrun Protection High mounting - EUHC 180

For mounting on low frames. The product has a surface treatment of the highest quality, with a powder-coated finish for increased durability. Approved in accordance with UNECE R58 Revision 3. Undril...
R58.03
VBG End plate Underrun Protection Medium high mounting - EUM 180

VBG End plate Underrun Protection Medium high mounting - EUM 180

For mounting on high frames. The product has a surface treatment of the highest quality, with a powder-coated finish for increased durability. Approved in accordance with UNECE R58 Revision 3.
R58.03
VBG End plate Underrun Protection Medium high mounting - EUMC 180

VBG End plate Underrun Protection Medium high mounting - EUMC 180

For mounting on high frames. The product has a surface treatment of the highest quality, with a powder-coated finish for increased durability. Approved in accordance with UNECE R58 Revision 3. Undri...
VBG End plate Underrun Protection High mounting - EUH-2

VBG End plate Underrun Protection High mounting - EUH-2

For mounting on low frames.

VBG End plate Underrun Protection High mounting - EUH-3

VBG End plate Underrun Protection High mounting - EUH-3

For mounting on low frames. Undrilled endplate.

VBG End plate Underrun Protection Medium high mounting - EUM-2

VBG End plate Underrun Protection Medium high mounting - EUM-2

For mounting on high frames.
VBG End plate Underrun Protection Medium high mounting - EUM-3.

VBG End plate Underrun Protection Medium high mounting - EUM-3.

For mounting on high frames. Undrilled endplate.
VBG End plate Underrun Protection Low mounting - EUL

VBG End plate Underrun Protection Low mounting - EUL

For rearward positioning of the underrun protection

End plate - Trailer

R58.03
VBG End plate Underrun Protection Trailer mounting - EUT 180

VBG End plate Underrun Protection Trailer mounting - EUT 180

For mounting on trailers with I-beam in combination with one of VBG’s underrun protection beams certified according to R58.03. EUT 180 is assemb...
VBG End plate Underrun Protection Trailer mounting - EUT

VBG End plate Underrun Protection Trailer mounting - EUT

For mounting on trailers with I-beam

End plate - Removable underrun protection

R58.03
VBG End plate Underrun Protection removable mounting - EUR 180

VBG End plate Underrun Protection removable mounting - EUR 180

Detachable endplate for underrun protection. ...
VBG End plate Underrun Protection removable mounting - EUR-4

VBG End plate Underrun Protection removable mounting - EUR-4

For removable underrun protection.

End plate - Special for MFC and Rear End Solution

R58.03
VBG MFC End plate Underrun Protection Low mounting - EUP 180-MFC

VBG MFC End plate Underrun Protection Low mounting - EUP 180-MFC

For mounting underride protection on MFC end plates in combination with one of VBG’s underrun protection beams certified according to R58.03. Supplies with Screw Kit 21-204800 (4x M16x50)
VBG MFC End plate Underrun Protection Low mounting - EUS-MFC

VBG MFC End plate Underrun Protection Low mounting - EUS-MFC

For mounting underride protection on MFC end plates.

VBG End plate EUS RES

VBG End plate EUS RES

Designed for VBG Rear End Solution and vehicles requiring individual placement of underride protection with a short overhang. No holes on endplate. Supplied in pairs.
VBG End plate EUP RES

VBG End plate EUP RES

Designed for VBG Rear End Solution and vehicles requiring individual placement of underride protection with a short overhang. No holes on endplate. Supplied in pairs.

Horizontal Adjustment Bracket

Horizontal Adjustment Bracket

With an extended attachment/arm, you can move the position of the underrun protection backwards.

R58.03
VBG Backward extension UPS 180 L=300

VBG Backward extension UPS 180 L=300

For rearward positioning of the underrun protection. The UPS 180 attachment makes it possible to move in increments of 37,5 mm, up to max. 262 mm. Depending on which endplate you use, different mount...
R58.03
VBG Backward extension UPS 180 L=300 + UHAP 100

VBG Backward extension UPS 180 L=300 + UHAP 100

For rearward positioning of the underrun protection UHAP 100. The UPS 180 attachment makes it possible to move in increments of 37,5 mm, up to max. 262 mm.

R58.03
VBG Backward extension UPS 180 L=750

VBG Backward extension UPS 180 L=750

For rearward positioning of the underrun protection. The UPS 180 attachment makes it possible to move in increments of 37,5 mm, up to max. 712mm. Depending on which endplate you use, different mounti...
R58.03
VBG Horizontal Extension UPB 18

VBG Horizontal Extension UPB 18

Bracket for rearward position of underrun protection together with drawbeam system CMS 63V EU 180. Moves the underrun protection 135 or 185 mm backwards. Supplied complete with 2 attachments.
VBG Backward extension UPS-2

VBG Backward extension UPS-2

For rearward positioning of the underrun protection. The UPS-2 attachment makes it possible to move in increments of 50 mm, up to max. 300 mm. UPS-2 may be mounted on the following endplates: EUP 60...
VBG Bracket UPB 100

VBG Bracket UPB 100

Bracket for rearward position of underrun protection together with drawbeam system CMS 63V EU. Moves the underrun protection 100 mm backwards. Supplied complete with 2 attachments and screws/nuts.
VBG Bracket UPB 150

VBG Bracket UPB 150

Bracket for rearward position of underrun protection together with drawbeam system CMS 63V EU. Moves the underrun protection 150 mm backwards. Supplied complete with 2 attachments and screws/nuts.

Protective beam

Protective beam

The protective beam absorbs impact forces in the event of a collision. It may become damaged during a reverse collision and may need to be replaced. VBG’s protective beams are suitable for all vehicle types and are available in various materials, lengths and profiles.

R58.03
VBG Aluminium beam UHAP 180

VBG Aluminium beam UHAP 180

Weight-optimised aluminium protective beam. Approved in accordance with UNECE R58 Revision 3. The protective beam is available in two lengths for a variety of vehicle and frame widths. The protective ...
R58.03
VBG Aluminium beam UHAP 100

VBG Aluminium beam UHAP 100

The protective beam is suitable for vehicles with a total weight of up to 12 tonnes. Weight-optimised aluminium protective beam. Approved in accordance with UNECE R58 Revision 3. Supplies complete w...
R58.03
VBG Steel beam UOSP 180

VBG Steel beam UOSP 180

Open steel protective beam, customisable for easy lighting and licence plate installation. Approved in accordance with UNECE R58 Revision 3. The product has a surface treatment of the highest qualit...
R58.03
VBG Steel beam UOSP 180 - Stainless steel

VBG Steel beam UOSP 180 - Stainless steel

Open stainless steel protective beam, customisable for easy lighting and licence plate installation. Approved in accordance with UNECE R58 Revision 3.
R58.03
VBG Steel beam UCSP 180 - For fixed mounting

VBG Steel beam UCSP 180 - For fixed mounting

Round steel protective beam. Approved in accordance with UNECE R58 Revision 3. The product has a surface treatment of the highest quality, with a powder-coated finish for increased durability. The bea...
R58.03
VBG Steel beam UCSP 180 - For Trailer mounting

VBG Steel beam UCSP 180 - For Trailer mounting

Round steel protective beam. Approved in accordance with UNECE R58 Revision 3. The product has a surface treatment of the highest quality, with a powder-coated finish for increased durability. The bea...
R58.03
VBG Steel beam UCSP 180 - For foldable mounting

VBG Steel beam UCSP 180 - For foldable mounting

Round steel protective beam for Foldable Underrun Protection EUF 180. Approved in accordance with UNECE R58 Revision 3. The product has a surface treatment of the highest quality, with a powder-coated...
R58.03
VBG Steel beam UCSP 180 - TOW

VBG Steel beam UCSP 180 - TOW

Round protective beam in steel for permanent installation. Approved for ball bracket mounting. The product has a surface treatment of the highest quality, with a powder-coated finish for increased dur...
VBG Aluminium beam UHAP-2

VBG Aluminium beam UHAP-2

Lightweight protective beam in anodised aluminium, ready to be equipped with mud flap attachments, and also available in different version with mounted reflectors for tractor units. The beams are avai...
VBG Steel beam UOSP

VBG Steel beam UOSP

Steel protective beam with open profile. Can be supplemented with, for example, lighting.
VBG Steel beam UCSP

VBG Steel beam UCSP

Flexible and lightweight steel protective beam. Cylindrical profile.
VBG Steel beam UDSP

VBG Steel beam UDSP

Strong steel protective beam. Rhomboid profile, ideal for construction vehicles.

Accessories

R58.03
VBG mounting kit - Angle bracket UHAP 100

VBG mounting kit - Angle bracket UHAP 100

Angle bracket suitable for VBG protective beams UHAP 100. Supplied complete with 4 angle brackets and screws/nuts.
R58.03
VBG mounting kit - Angle bracket UHAP 180

VBG mounting kit - Angle bracket UHAP 180

Angle bracket suitable for VBG protective beams UHAP 180. For installing together with VBG’s underrun protection endplates EDSU 180, EUP 180, EUM 180, EUH 180 and foldable endplate EUF 180. Supplied ...
R58.03
VBG Mounting kit UOSP 180

VBG Mounting kit UOSP 180

The Mounting kit is suitable for VBG protective beams UOSP 180. For installing together with VBG’s underrun protection endplates EDSU 180, EUP 180, EUM 180, EUH 180 and foldable endplate EUF 180. Sup...
R58.03
VBG mounting kit - Angle bracket UCSP 180

VBG mounting kit - Angle bracket UCSP 180

Angle bracket suitable for VBG protective beams UCSP 180. For installing together with VBG’s underrun protection endplates EDSU 180, EUP 180, EUM 180, EUH 180 and foldable endplate EUF 180. Supplied ...
VBG mounting kit - Angle bracket

VBG mounting kit - Angle bracket

Angle bracket suitable for VBG protective beams UHAP-2 and UOSP. For installing together with VBG’s underrun protection endplates EUP, EUR-4 and foldable endplate EUF-2. Supplied complete with 4 angl...
VBG Bracket kit for underrun protection beam UOSP

VBG Bracket kit for underrun protection beam UOSP

A mounting plate is always required for all drawbeam systems and end plates. Complete kit with 2 plates and 8 screws/nuts.
VBG mounting kit - Angle bracket EUP RES

VBG mounting kit - Angle bracket EUP RES

Angle bracket suitable for VBG protective beam UHAP-2. For installing together with VBG’s underrun protection endplate EUP RES. Supplied complete with 4 angle brackets and screws/nuts.
VBG Bracket kit for underrun protection beam UCSP

VBG Bracket kit for underrun protection beam UCSP

Tube bracket for installing together with VBG’s underrun protection endplates EUP, EUP RES, removable underrun protection endplate EUR-4, foldable endplate EUF-2, and for rearward position underrun pr...
VBG clamp bracket kit for underrun protection beam UCSP

VBG clamp bracket kit for underrun protection beam UCSP

Clamp bracket for installing together with VBG’s underrun protection endplates EUS-4, EUT, EUL, EUH-3, EUM-3, EUS-MFC and VBG Drawbeam CMS 63V EU. Supplied complete with 4 U-bolts, 2 clamp brackets a...
Spacers for VBG protective beam UDSP

Spacers for VBG protective beam UDSP

When selecting spacers for use a maximum of 2 spacers is permitted on each side with a maximum total thickness of 18 mm.
Screwkit UHAP 180

Screwkit UHAP 180

Used as a spare part to UHAP 180. If UHAP 180 is mounted on Drawbeam CMS 63V EU 180, screw skit 21-751600 is used.
Screwkit UCSP 180

Screwkit UCSP 180

Used as a spare part to UCSP 180. If UCSP 180 is mounted on Drawbeam CMS 63V EU 180, screw skit 21-751700 is used.
This site saves cookie files on your computer to gather information about how the site is used and to store your preferences. Read more about cookies here. By proceeding to the pages you accept cookies.